How to Download and Use UMT MTK Tool Crack for MediaTek Devices
If you are looking for a free and easy way to flash, repair, unlock, or bypass FRP on your MediaTek devices, you might want to try UMT MTK Tool Crack. UMT MTK Tool Crack is a modified version of the original UMT MTK Tool that allows you to use it without a box or dongle. In this article, we will show you how to download and use UMT MTK Tool Crack for your MediaTek devices.
What is UMT MTK Tool Crack?
UMT MTK Tool Crack is a small Windows utility tool that helps you to perform various tasks on your MediaTek-powered devices. It supports a wide range of MT65XX and MT67XX chipset devices from various brands such as Infinix, Lava, Tecno, Xiaomi, Oppo, Vivo, Realme, Meizu, Meitu, and more. Some of the features of UMT MTK Tool Crack are:
To download UMT MTK Tool Crack, you can use the link below. The file is in zip format and you need to extract it on your PC using WinRAR or 7-Zip. The file size is about 100 MB and it contains the tool setup file and the loader file.
Download UMT MTK Tool Crack
How to Install UMT MTK Tool Crack?
To install UMT MTK Tool Crack on your PC, you need to follow these steps:
Extract the downloaded zip file on your PC.
Run the setup file (UMTv2_UMTPro_UltimateMTK_4.4.exe) as administrator and follow the on-screen instructions.
It will also ask you to install the MTK driver. Just click on it and select the checkbox.
Click on Finish to complete the installation process.
Copy the loader file (UMTv2_UMTPro_UltimateMTK_4.4_Loader.exe) and paste it into the installation folder (C:\\UMTool\\UltimateMTK\\v4.4).
Create a shortcut of the loader file on your desktop for easy access.
How to Use UMT MTK Tool Crack?
To use UMT MTK Tool Crack on your PC, you need to follow these steps:
Run the loader file (UMTv2_UMTPro_UltimateMTK_4.4_Loader.exe) as administrator.
It will open the tool interface and ask you to enter a password. Just type \"gsmofficial.com\" without quotes and click on OK.
The tool will launch and you can see various tabs such as Flasher, Tools/FRP, etc.
If you want to flash firmware on your device, go to the Flasher tab and select the scatter file, DA & AUTH file from your firmware folder.
To flash it, switch off your device and press and hold Volume Up + Down buttons while connecting it to the PC via USB cable.
Some devices may require a special boot cable or test point to boot into download mode.
You can also use advanced options such as High-Speed Port, Format Download, Without Battery, and Flash.
If you want to remove FRP lock on your device, go to the Tools/FRP tab and select your device model from the list.
Switch off your device and connect it to the PC via USB cable in download mode.